Internet Bonding: SmoothWAN utilizes Speedify's technology to bond two or more internet connections, providing a reliable and high-performance internet access solution. Hardware Compatibility: SmoothWAN supports a range of hardware options, ordered by speed: This choice is made based on the lack of affordable consumer-based alternatives and the desire to provide an accessible solution to a broader audience. Our project aims to address the limitations of existing open-source solutions by incorporating the commercial technology of Speedify. SmoothWAN is an open-source initiative driven by the need for an affordable and feature-rich internet bonding router. With an emphasis on user-friendly configuration through a web interface, SmoothWAN aims to make internet bonding accessible to users of all technical levels. Our goal is to offer a custom router distribution based on OpenWrt, specifically designed for fixed internet bonding setups. This is referring to raspi-config when setting up the Raspberry Pi.Welcome to SmoothWAN, a small project that aims to provide a reliable and efficient internet bonding solution using Speedify. If in the nf file you have the country set as GB, make sure that the same country code is set in: grep country /etc/wpa_supplicant/wpa_nf For, example, you can set wlan0 to Always: /usr/share/speedify/speedify_cli adapter priority wlan0 alwaysĬheck if the Wi-Fi is blocked with the following command:Ĭheck that the country codes are matching. If you disable sharing and want to use the SHARE_INTERFACE as an Internet connection again, change it back to another priority. When you start sharing, Speedify will automatically set the SHARE_INTERFACE to the NEVER priority, so that Speedify will ignore it and not use it as an Internet connection. You will need to restart the Speedify service for the change to take effect. To stop using the Wi-Fi for a hotspot, configure the sharing options in /etc/speedify/nf. You may want to make a backup of the file before doing so. On the Raspberry Pi, saved Wi-Fi networks will be stored in /etc/wpa_nf. If you are sure your configuration is correct but the hotspot isn't visible, try removing the previous network information and rebooting. Note: Sometimes saved Wi-Fi networks interfere with the hotspot appearing. If you are using Ubuntu Server, it doesn't come with Network Manager installed, so you will need to install Network Manager for the sharing feature to work. On Ubuntu, Speedify uses Network Manager for sharing. Subsequent starts should be much quicker. The first time running this after enabling sharing might take a little while so that Speedify can install and configure the necessary packages. Exit the text editor (nano) by hitting ctrl+X and then run:: sudo service speedify-sharing restart Once you have configured the sharing settings, save the file (if you are using nano, hit ctrl+O and press enter to save). Make sure you're not connected to a Wi-Fi network as a client, as this may stop the sharing from starting. You should set this to the correct country to comply with your local regulations for wireless networks. To specify the country code Wi-Fi, set: WIFI_COUNTRY="US" Speedify will default to channel 1 for 2.4GHz or you can set the channel to 36 for 5 GHz To adjust the Wi-Fi channel: WIFI_CHANNEL="1" If your Wi-Fi adapter supports 5GHz, you can change: WIFI_MODE="5" Make sure to uncomment the following lines (remove #) To share over a Wi-Fi interface wlan0, set: ENABLE_SHARE=1īy default, Speedify will create a 2.4 GHz hotspot. You can edit the config with nano, in that case, the command would be as follows: sudo nano /etc/speedify/nf Configuring Speedify as a HotspotĬonfigure the sharing options in /etc/speedify/nf. Speedify can be configured to share the VPN connection as a Wi-Fi hotspot that other devices can join. How can I share my Speedify connection on Linux (Ubuntu and Raspberry Pi OS) via Wi-Fi?
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |